|
№
|
The name of equipment, model (mark)
|
The manufacturer (enterprise, firm, country)
|
The basic characteristics
|
|
Controllable parameters
|
The range of controllable measurement of parameter, error
|
|
1.
|
Roller brake stand IW2 (EURO-SYSTEM PKW) for cars and minibuses with loading on an axis up to 4 tons
|
Firm "MAHA ", Maschinenbau Haldenwang GmbHCo. KG, Germany
|
The maximal brake forces on the wheels of vehicle - direct measurements. The general specific brake force, the factor of non-uniformity of brake forces of axis wheels, the factor of parts compatibility of the lorry convoy (if necessary) - recalculation.
|
A range of measurement of the maximal brake forces (direct measurements) The error of measurement – 2%.
|
|
2.
|
The device for checking a light stream of the headlights of a car type LITE 1.2
|
Firm "MAHA ", Maschinenbau Haldenwang GmbHCo. KG, Germany
|
Distance from a projection of the center of a headlight up to chiaroscurale borders of a bunch on the screen (mm) removed on 10 m. The force of light headlights.
|
Distance: above – 0… 500 mm, below 0… 500 mm, at the left 0 … 500 mm, on the right 0 … 500 mm. Force of light 0 … 50000 кд. The height of installation of the lens center above a floor from 200 up to 1300 mm. Error up to 10%.
|
|
3.
|
Gas analyzer "Tecnotest" model. 488
|
Firm " Tecnotest ", Italy
|
СО, СО2, СН, Nox, О2, lambda particle
|
СО 0…9,99%, СО2 0…19,9%, СН 0…9999 million-1, Nox 0…4000 million-1, О2 0…4%, lambda particle 0,5…1500. Error +/- 5%.
|
|
4.
|
Transmissometer MDO-2 (a diesel gas analyzer - the device for definition of smoke with the manual board)
|
Firm "MAHA ", Maschinenbau Haldenwang GmbHCo. KG, Germany
|
The optical density of fulfilled gases of cars with diesel engines, in %.
|
0%…100% smoke. Number of turns 0…8000 1/min. Temperature of oil 0…150оС. Error 2%.
|
|
5.
|
The stand for checking the lateral withdrawal of car wheels MINK
|
Firm "MAHA ", Maschinenbau Haldenwang GmbHCo. KG, Germany
|
The wheels convergence of an axis (axes) of the car, led to a value of m/km.
|
Convergence +/-20 мм/м. Error 2%.
|
|
6.
|
The backlashes detector of suspension brackets of a car PMS 3/2
|
Firm "MAHA ", Maschinenbau Haldenwang GmbHCo. KG, Germany
|
The visual check of mobility of details, backlashes, fixings of carving connections and conditions of steering management, check of a suspension bracket, integrity of details and units.
|
The longitudinal moving of wheels of the car +/-50 mm. The cross-section moving of wheels of the car +/-50 mm. The maximal pressure upon an axis 2,5 tons.
|
|
7.
|
The device for measurement of efforts to brake pedals of type PED
|
Firm "MAHA ", Maschinenbau Haldenwang GmbHCo. KG, Germany
|
The force on controls of working and lay brake system at an estimation of braking efficiency.
|
The range of measurement on a control effort 0…100 kgs, 0…980 N.
|
